Tel.: +91 - 22 - 4058 9888
Fax: +91 - 22 - 4058 9890
E-mail:
sales@remilabworld.com
Environmental Test Chambers / Seed Germinators

The REMI Humidity Chambers are designed for testing of electronic, electrical components, corrosion studies on mechanical parts, shelf life studies on paints, varnishes and cement at respective manufacturing facilities. These chambers control precise temperature and humidity.

Seed Germinators are used for germination & biological studies, which includes Fluorescent lights coupled with 24 hours cyclic timer for lights on / off regulation.

These chambers are available in standard & GMP versions.

  • Temperature range 10°C to 60°C, Humidity range 40% to 95% Rh
  • Precise monitoring of temperature and humidity conditions
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber
  • Heating by long life SS tubular heaters
  • Validation protocol with IQ, OQ, DQ Documentation as per ICH guidelines
 
  • Microprocessor controller with LCD display & capacitance type sensor for precise control of temperature and humidity
  • 4 Inch attractive LCD display for direct display of humidity & temperature
  • Battery Backup for Temperature Controller
  • Auto tunning of controller
  • Self-Diagnosis for errors
  • Power failure and resumption recorded with date and time
  • Machine filled PUF insulation to eliminate void pockets
  • Unique design of thermal barrier for better energy efficiency
  • Hermetically sealed Compressor with CFC free refrigerant
 
  • Histogram format of 24 hours temperature & humidity recording
  • Settable High / low alarm points with date and time
  • Memory for storage of up to 1000 records
  • Centronic interface to record Temperature, Humidity, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Chamber calibration port on side
  • Adjustable trays
  • PC communication with RS-485 with data acquisition software
  • Remi Data acquisition software complying to 21 CFR part 11 requirements (optional)
  • Data logger for 8 Point (4 + 4) temperature / humidity recording with sensor, printer interface and software (Optional)
 
  • Low water level alarm and power cutoff of boiler tank heater
  • High temperature safety cut off & alarms for high/low set parameters
  • Output for remote alarm
  • Electrical circuit breaker
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
Note: Use of distilled or demineralized water is strongly recommended for boiler.
 
Features of Remi Software as per 21 CFR part 11 requirements
  • Multiple level alpha numerical password with password ageing
  • Electronic signature and menu entered comment
  • Secured audit trail report
  • Alarm report with mention of alarm condition
  • Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
  • Reports in graphical and tabular form
  • Data Stored in PC server with Lan connectivity and can be monitored on any PC with password authentication
  • Multi chamber data acquisition on single software
  • Communications through RS 485 / TCP-IP
Technical Data
  CHM-6 Plus /
SG-6 Plus
CHM-10 Plus /
SG-10 Plus
CHM-12 Plus CHM-16 Plus CHM-19 Plus/
SG-19 Plus
CHM-28 Plus/
SG-28 Plus
CHM-35 Plus/
SG-35 Plus
Internal Volume (Liters) 200 280 370 450 540 800 1000
Number of Shelves 2 / 3 3 / 5 4 5 6 / 8 6 / 10 7 / 10
Internal Dimensions W x D x H (mm) 660 x 655 x 450 660 x 655 x 650 660 x 655 x 850 660 x 655 x 1050 660 x 655 x 1250 800 x 655 x 1250 800 x 800 x 1580
External Dimensions W x D x H (mm) 800 x 1095 x 1020 800 x 1095 x 1220 800 x 1095 x 1420 800 x 1095 x 1620 800 x 1095 x 1820 960 x 1370 x 1950 960 x 1370 x 2270
Temperature Range & Accuracy 10°C to 60°C, ± 1°C
Humidity Range (Rh) & Accuracy 40% to 95%, ± 3%
Temperature & Humidity control Microprocessor with Capacitance type sensor
Display 4" LCD Screen, Large size Display for ease of reading
Power Failure Alarm Audio Visual Alarm
Door Open Alarm Audio Alarm in case door open for over one minute
Temperature / Humidity Variation Alarm Set Humidity ± 3%, Set Temperature ± 2°C, Audio Visual Alarm
Illumination 8 Watts Fluorescent Lamp
Internal Body Material Stainless Steel - 304 grade (Standard Models), Stainless Steel - 316 grade (GMP Models)
External Body Material Powder Coated CRCA Steel (Standard Models), Stainless Steel - 304 grade (GMP Models)
Insulation 70 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise Level Less Than 65 db (A)
Recommended Voltage Stabilizer VS-04 VS-07
Electrical 220-240 volts, 50Hz, Single Phase
^TOP
PRODUCT SELECTION
Laboratory Division
Blood Bank Division
Healthcare Division
 
 
Asia Pharma Expo
Bangladesh
Feb. 23rd to 25th, 2016
VIEW ALL
 
 
REMI Profile
» Why Us
» Company Profile
» Careers
» Events
  » Certification
» Synergies
» Infrastructure Details
» Major Landmarks
  Others  
  » E catalogue
» Product Application
» Clientele
» Pioneers
  » REMI Corporate
» Design and Development
» Corporate Social Responsibility
» Virtual Factory Tour
  Remi House
  3rd Floor, 11, Cama Industrial Estate
Walbhat Road, Goregaon (East) Mumbai - 400 063, INDIA.
Tel.: +91 - 22 - 4058 9888 Fax: +91 - 22 - 4058 9890
E-mail: sales@remilabworld.com
Home | Profile | Products | Contact | Careers | Policy | Sitemap | Resources | Powered by © 2016 REMI GROUP. All Rights Reserved.