Remi Bench Top Orbital Shaking Incubator Model CIS 18 Plus finds application in researches on bacteria, cultivation, fermentation, hybridization, chemical and biochemical reaction, enzymes and tissues research, which have a high requirement on precision of shaking speed and temperature.
Construction: Its shell is made of engineering plastics through molding with a mechanical oscillating tray driven by a motor fitted at the bottom. The Oscillating locus is circular. The duct plate behind the working chamber is SS thin plate and all the operating keys on the LCD screen are on the front side. Box door Is of a big flap structure made of transparent plastics to facilitate observation, removal or placement of cultures. Closed-loop control of temperature and speed is effected with microcomputer electronic controller using PID regulation mode with LCD screen display. Hot and cold air stream is circulated through a blower behind the duct plate in the working chamber, thereby improving the uniformity of temperature in the working chamber.
Safety Multiple start of compressor in a short time is prevented and the controller performs the function of prolonged start before compressor is started.
When the measured temperature is in excess of the set temperature by 3°C, the buzzer will give an over-temperature alarm and simultaneously the heater will shut down. When the box door opens, the door switch will cut off the power to stop the Heater, blower and rotating fan from work and the operator can remove or place the cultures safely.
Stainless-steel chamber and platform easy to clean
Transparent plastic door
Microprocessor controller with large LCD screen for temperature and shaking speed with timing function
Self-check function easy to identify problems
Smooth start and stop system prevents liquid spillage
Auto-controller of fan speed to prevent damage to the samples
Safety door switch, auto pause operation when it is opened
Shaking Speed Range
Platform Size (mm)
450 x 450
Maximum Shaking Capacity
4x2000ml, 8x1000ml, 11x500ml,
(No. of flasks x Volume)*
12x250ml, 28x100ml, 42x50ml
Load in Tray
≤ 10 Kg
Recommended Voltage Stabilizer
* Supply: 220-240 Volts, 50 Hz, single phase. Clamps to be ordered separately