Vaccine Freezer
| Healthcare Products | Vaccine Freezer
REMI Vaccine Freezers are specially designed to meet storage requirement of biological samples, specimens & vaccines as well as freezing ice packs for cold chain maintenance.
WHO – GMP certified manufacturing unit with no hazardous chemical. Tropicalized to run under ambient condition of 10°C to 43°C temperature & up to 95% RH humidity.
Salient Features :
- Rounded inner chamber with High density insulated door & cabinet to reduce temperature loss
- Adjustable legs to fix height from 70 to 105 mm from ground
- Handle with key lock for solid door
- Hermetically sealed Compressor with CFC free refrigerant with 99.97% pure copper refrigeration tubes
- Wired mesh storage basket for allowing free air circulation
- Password protection to avoid unauthorized settings
- Time delay for compressor switch on with overload cut – off
relay - Audio / Visual alarms for temperature high / low, Power failure,
Compressor & Power on - Provision for defrost
- Drain outlet for condensate water
Optional Accessories :
- Alcohol Stem Thermometer temperature range – 40°C to 50°C, Provided with calibration certificate from NABL approve lab
- Automatic voltage stabilizer with output capacity 1 KVA and with overload protection, under voltage & over range cut off, short circuit protection complying to WHO PQS/E07
| Technical Specification | ||
| RQF 125 | RQF 240 | |
|---|---|---|
| Internal Volume (Liters) | 125 | 220 |
| Number of Baskets | 80 | 150 |
| Dimensions (W x D xH (mm)) | 543 x 533 x 740 (Internal), 710 x 721 x 903 (External) | 890 x 560 x 590 (Internal), 1060 x 800 x 760 (External) |
| Settable Temperature | -15°C to -25°C | |
| Insulation (CFC free PUF) | 80 mm for Body & Door | |
| Temperature control | Microprocessor | |
| Display | 7 Segment LED with temperature display up to one decimal point | |
| Internal Body Material | Stainless Steel – 304 grade (Non Magnetic, Non Corrosive) | |
| External Body Material | Precoated GI Steel (Corrosion resistant & Water Resistant) | |
| Noise Level | Less Than 65 db(A) | |
| Sensor | PT-100 (Accuracy ± 0.5°C) | |
| Supply | 220-240 Volts, 50 Hz Single Phase | |
