Centrifuge model CM-8 Plus is suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories.
Micro Centrifuge model CM-12 Plus is useful for routine applications in bio-technology, PCR, life sciences, biochemical and clinical labs etc. for centrifugation with micro tubes from 0.2 ml up to 1.5 ml.
Salient Features :
- Stable speed output
- Pre-cooling feature
- Fast spin feature
- Brushless motor with frequency drive
- Microprocessor based with LCD display
- Self-diagnosis of errors
- 24 programme memory
- 3 Accelerations, 4 Deceleration profiles
- Choice of rpm / rcf setting & display
- Countdown timer 0-99 minutes & continuous run
- Last parameters recall
- Automatic Rotor identification
- Safety lid interlock to prevent lid opening during centrifugation
- Imbalance detection
- Gas hinge to prevent falling of door
- Emergency lid lock release
| Technical Data | ||
| Models | CM-8 Plus | CM-12 Plus |
| Max Speed (rpm) | 6000 | 16000 |
| Max. RCF (g) | 5070 | 16600 |
| Max. Tube Size (ml) | 100 | 5 |
| Max. Capacity (ml) | 400 | 40 |
| *Min. Temperature (°C) | -8 | -8 |
| #Noise | ≤ 60 dB | ≤ 60 dB |
| Dimensions (W × D × H) (mm) | 480 × 585 × 530 | |
| Voltage Stabilizers | VS-2 | VS-2 |
Supply: 220-240 Volts 50 Hz Single Phase.
* Note : Depending on capacity, type of rotor centrifugation speed, ambient temperatures and other process parameters.
# Note : Measured as per standard protocol
